MAX996EUD+T
| Parameters | |
|---|---|
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX996 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-2.5/3/5V |
| Nominal Supply Current | 320μA |
| Max Supply Current | 320μA |
| Propagation Delay | 210 ns |
| Quiescent Current | 96μA |
| Response Time | 210 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 96μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±2.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Subcategory | Comparators |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
MAX996EUD+T Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.There is a CMOS, Open-Drain, Rail-to-Rail, TTL output type for this comparator.This device is designed in Tape & Reel (TR) case.The device is designed with 14 terminations.The electrical component here belongs to the Comparators family.Supplied by 2.7V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 4 elements in it.A total of 14 pins are included.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .There are 14 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX996 .This comparator presents a quiescent current of 96μA .A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 320μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 320μA .Electronic comparator is sufficient to run the device wElectronic comparatorh +-1.5/+-2.5/3/5V power supplies.
MAX996EUD+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 96μA
MAX996EUD+T Applications
There are a lot of Maxim Integrated MAX996EUD+T linear comparators applications.
- Industrial
- Zero-Crossing Detectors
- Lithium ion battery monitoring
- Automatic Test Equipment
- Window Comparators
- Notebooks and PDAs
- Body Control Modules
- High-Speed Differential Line Receiver
- Power management
- Window Comparators, Multivibrators
