banner_page

MAX997ESA+T

Surface Mount Tape & Reel (TR) 4.5 ns μs Linear Comparators 15μA pA 2012 6.5mA μA 1.5mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX997ESA+T
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 380
  • Description: Surface Mount Tape & Reel (TR) 4.5 ns μs Linear Comparators 15μA pA 2012 6.5mA μA 1.5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2012
Series Beyond-the-Rails™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparators
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Base Part Number MAX997
Pin Count 8
Output Type CMOS, TTL
Number of Elements 1
Power Supplies 3/5V
Nominal Supply Current 6.5mA
Max Supply Current 6.5mA
Propagation Delay 4.5 ns
Quiescent Current 6.5mA
Response Time 4.5 ns
Common Mode Rejection Ratio 86.02 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 1.5mV
Supply Voltage Limit-Max 5.5V
Input Bias Current 15μA
Voltage - Input Offset (Max) 1.5mV @ 5V
Current - Input Bias (Max) 15μA @ 5V
Hysteresis 3.5mV
CMRR, PSRR (Typ) 80dB CMRR, 86.02dB PSRR
Propagation Delay (Max) 7ns
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX997ESA+T Overview


In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, TTL output is used here.As a result, it is designed with Tape & Reel (TR) package.8 terminals are found on the comparator.The electrical component in this case belongs to the Comparators families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .It's a typical General Purpose comparator.In total, it contains 1 elements.The board includes 8 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX997 .The comparator displays a quiescent current of 6.5mA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 6.5mA in order to use the device normally.Current supply exceeding 6.5mA could cause disfunction of the compartator.This device requires 3/5V power supplies to operate.The part is based on Beyond-the-Rails? .

MAX997ESA+T Features


CMOS, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 6.5mA

MAX997ESA+T Applications


There are a lot of Maxim Integrated MAX997ESA+T linear comparators applications.

  • Analog front end
  • Security Detection Systems
  • Limit Comparators
  • Window Comparators, Multivibrators
  • Lithium ion battery monitoring
  • Window Comparators
  • Infotainment & cluster
  • Zero-Crossing Detectors
  • Portable Battery Monitoring
  • Metering Systems

Write a review

Note: HTML is not translated!
    Bad           Good