MAX997EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX997 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 6.5mA |
| Max Supply Current | 6.5mA |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 6.5mA |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1.5mV |
| Average Bias Current-Max (IIB) | 30μA |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 15μA |
| Input Bias Current | 15μA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 15μA @ 5V |
| Hysteresis | 3.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 7ns |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX997EUA+ Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.The comparator has a CMOS, TTL output.The chip is packaged with Tube .You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparators families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Electronic comparator is possible to classify the chip as General Purpose .There are a total of 1 elements in it.A total of 8 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.8 pins are present on the comparator.You may wish to search MAX997 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 6.5mA .The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 6.5mA when using the device.A supply current exceeding 6.5mA may result in the comparator malfunctioning.The device can be run with 3/5V power supplies.Input current to the device is limited to 15μA .The part is based on Beyond-the-Rails? .
MAX997EUA+ Features
CMOS, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 6.5mA
MAX997EUA+ Applications
There are a lot of Maxim Integrated MAX997EUA+ linear comparators applications.
- Security Detection Systems
- Power Supervision
- Zero-Crossing Detectors
- Industrial
- General-Purpose, Low-Voltage Applications
- Point of load regulators
- Laptop Computers
- Portable and Battery-Powered Systems
- Metering Systems
- General-Purpose Portable Devices
