banner_page

MAX997EUA-T

Surface Mount Tape & Reel (TR) 4.5 ns μs Linear Comparators 15μA pA 2007 6.5mA μA 1.5mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX997EUA-T
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 776
  • Description: Surface Mount Tape & Reel (TR) 4.5 ns μs Linear Comparators 15μA pA 2007 6.5mA μA 1.5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2007
Series Beyond-the-Rails™
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Comparator
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.65mm
Base Part Number MAX997
Pin Count 8
Output Type CMOS, TTL
Number of Elements 1
Power Supplies 3/5V
Nominal Supply Current 6.5mA
Max Supply Current 6.5mA
Propagation Delay 4.5 ns
Quiescent Current 6.5mA
Turn On Delay Time 4.5 ns
Response Time 4.5 ns
Common Mode Rejection Ratio 86.02 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 1.5mV
Average Bias Current-Max (IIB) 30μA
Supply Voltage Limit-Max 5.5V
Input Bias Current 15μA
Voltage - Input Offset (Max) 1.5mV @ 5V
Current - Input Bias (Max) 15μA @ 5V
Hysteresis 3.5mV
CMRR, PSRR (Typ) 80dB CMRR, 86.02dB PSRR
Propagation Delay (Max) 7ns
Length 3mm
Width 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX997EUA-T Overview


The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.There is a CMOS, TTL output type for this comparator.This chip is designed with the Tape & Reel (TR) package.As you can see, the comparator has8 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Speaking of types, this is a typical General Purpose comparator.The total number of elements is 1 .The pinout of the component starts from 8 pins it has.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.This comparator has 8 pins.In order to find a solution that meets your specific needs, search MAX997 for more pin-to-pin solutions.A quiescent current of 6.5mA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 6.5mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 6.5mA .The device can be run with 3/5V power supplies.The part is from Beyond-the-Rails? comparator series.

MAX997EUA-T Features


CMOS, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 6.5mA

MAX997EUA-T Applications


There are a lot of Maxim Integrated MAX997EUA-T linear comparators applications.

  • General Purpose Low Voltage Applications
  • Zero-Crossing Detectors
  • Handheld Instruments
  • Portable and Battery-Powered Systems
  • Alarm and Monitoring Circuits
  • Self-diagnostics
  • Wireless Base Stations
  • Appliances
  • Point of load regulators
  • Mobile Phones and Tablets

Write a review

Note: HTML is not translated!
    Bad           Good