MAX998EUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX998 |
| Pin Count | 6 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 650μA |
| Max Supply Current | 650μA |
| Propagation Delay | 28 ns |
| Quiescent Current | 650μA |
| Response Time | 28 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 1nA |
| Input Offset Voltage (Vos) | 200μV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 75nA |
| Input Bias Current | 75nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.075μA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 95dB CMRR, 100dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX998EUT+T Overview
The product is packaged in SOT-23-6 in order to facilitate transportation.A comparator with an output type of CMOS, Rail-to-Rail, TTL is being used.This device is designed in Tape & Reel (TR) case.There are6 terminals on the comparator.Electronic comparator is a part of Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as General Purpose .The board includes 6 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator consists of 6 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX998 .There is a quiescent current of 650μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 650μA .Current supply exceeding 650μA could cause disfunction of the compartator.The device can be powered by 3/5V power supplies.Electronic comparator is possible to input up to 75nA current into the device.
MAX998EUT+T Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 650μA
MAX998EUT+T Applications
There are a lot of Maxim Integrated MAX998EUT+T linear comparators applications.
- Appliances
- Infotainment & cluster
- Zero-Crossing Detectors
- Portable and Battery-Powered Systems
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- Power Supervision
- Battery-Powered Electronics
- RC Timers
- Handheld Instruments
