MAX999AAUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX999 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 6.5mA |
| Max Supply Current | 6.5mA |
| Propagation Delay | 7 ns |
| Quiescent Current | 7mA |
| Turn On Delay Time | 4.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 1.5mV |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 15μA |
| Input Bias Current | 15μA |
| Current - Quiescent (Max) | 7mA |
| Voltage - Input Offset (Max) | 1.5mV @ 5V |
| Current - Input Bias (Max) | 15μA @ 5V |
| Hysteresis | 3.5mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 86.02dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX999AAUK+T Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.The comparator has a CMOS, TTL output.The part will be shipped by Tape & Reel (TR) .There are5 terminals on the comparator.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.A comparator of this type is typically of type General Purpose .In total, it contains 1 elements.Electronic comparator is recommended that you mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.The comparator is equipped with 5 pins.You can search MAX999 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 7mA .The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 6.5mA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 6.5mA .You are allowed to input a maximum current of 15μA into the device.The part is from Beyond-the-Rails? comparator series.
MAX999AAUK+T Features
CMOS, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 7mA
MAX999AAUK+T Applications
There are a lot of Maxim Integrated MAX999AAUK+T linear comparators applications.
- Infotainment and Clusters
- Point of load regulators
- Industrial
- Hand-Held Electronics
- Body Control Modules
- Zero-Crossing Detectors
- Wearable Devices
- Battery-Powered Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones
