MB3773PF-G-BND-JNE1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOP |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1992 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Power Supply Monitor |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 200mW |
| Output | Open Drain or Open Collector |
| Number of Outputs | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 600μA |
| Output Current | 60mA |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.2V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 50ms Minimum |
| Ambient Temperature Range High | 85°C |
| Number of Monitored Inputs | 1 |
| Height | 2.25mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MB3773PF-G-BND-JNE1 Overview
There is a Tray-packaging method applied to IC management. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.209, 5.30mm Width) functions. It is a IC power that shares many benefits with other products from the Power Supply Monitor line. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. This power management system has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 3.5V. There should be no more than 16V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. As far as the supply current of the power management is concerned, it is 900μA. The power management has 1 monitored inputs. As IC power of its architecture, this IC power has 1 outputs.
MB3773PF-G-BND-JNE1 Features
Power Supply Monitor type
Minimum supply voltage of 3.5V
900μA operating supply current
MB3773PF-G-BND-JNE1 Applications
There are a lot of Cypress Semiconductor Corp MB3773PF-G-BND-JNE1 Voltage Supervisors applications.
- Cloud computing
- Digitally controlled LDO regulators circuit
- Microcontroller system
- Power distribution systems of infant care room
- Leakage current detection
- Efficient information transmission
- Transformer load monitoring equipment
- Battery cars
- Medical-specific insulation monitor
- Functional modules
