banner_page

MB88152APNF-G-111-JNERE1

3.3V Spread Spectrum Clock Generator 67MHz Clock Generators 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-MB88152APNF-G-111-JNERE1
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 489
  • Description: 3.3V Spread Spectrum Clock Generator 67MHz Clock Generators 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2017
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Type Spread Spectrum Clock Generator
Subcategory Clock Generators
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 3.3V
Output CMOS
JESD-30 Code R-PDSO-G8
Operating Supply Voltage 3.3V
Number of Circuits 1
Supply Current-Max 7mA
Frequency (Max) 67MHz
Input CMOS, Crystal
Ratio - Input:Output 1:1
Primary Clock/Crystal Frequency-Nom 67MHz
PLL Yes
Differential - Input:Output No/No
Length 5.05mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

MB88152APNF-G-111-JNERE1 Overview


Clock generator is packaged in the way of Tape & Reel (TR). 8-SOIC (0.154, 3.90mm Width) contains this Clock PLL. It contains 8 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. It is designed that the Clock PLL's input should be CMOS, Crystal. 1 circuits are implemented to access the electronic component's full performance. There is a maximum frequency of 67MHz Max with this clock-based frequency generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. As long as you provide 3V~3.6V supply voltage, it will work. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. There are several logic levels in CMOS logic that can be used with this clock generator. This electronic component is usually classified as a Spread Spectrum Clock Generator component. Time clock generator is capable of handling a voltage of 3.3V. A Clock Generators clock generator is essentially what this device is. The thermal destruction of an element may result from an excess of supply current (higher than 7mA).

MB88152APNF-G-111-JNERE1 Features


Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

MB88152APNF-G-111-JNERE1 Applications


There are a lot of Cypress Semiconductor Corp MB88152APNF-G-111-JNERE1 Clock Generators applications.

  • HDD recorders
  • Satellite navigation communication
  • Microprocessor clock multipliers
  • Signal modulation and demodulation
  • Pulsed digital systems
  • Integrated phase noise in aerospace systems
  • Televisions
  • Simple clock clean-up circuits
  • Reference signals to RF systems
  • Precision auxiliary angle deflection measurement

Write a review

Note: HTML is not translated!
    Bad           Good