MC100E016FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E016 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 8 |
| Propagation Delay | 900 ps |
| Turn On Delay Time | 900 ps |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 8 |
| fmax-Min | 700 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 700000000Hz |
| Count Rate | 900MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E016FN Overview
This device is packaged in a 28-LCC (J-Lead) package. There are 28terminations used for configuring it. Having a supply voltage of 5V enables to operate in a fully flexible manner. There are 1 terminations on the device. The number of all component pins is 28. Packaging is based on Tube. To connect the circuit's other components, there are 28pins. The way of Surface Mount is used to mount it. Having been designed as a member of the 100Eseries, it is well suited for use in a wide range of applications. It is assumed that the logic type is [0]. The operating temperature should be set at 0°C~85°C. Using a Surface Mountmounting type, it is mounted. When the supply voltage is set to [0], it is able to operate with greater reliability. The device contains 8bits of information. A major feature of this electronic device is its [0]. Among its base part number [0], you will find additional parts that are related. For the device to operate, a voltage supply of 5Vis required. It is possible to supply the device with the minimum supply voltage (Vsup) of 4.2V. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.7V volts. The 8input lines are used to input binary data as on/off signals.
MC100E016FN Features
Embedded in the 28-LCC (J-Lead) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Operating supply voltage of 5V
MC100E016FN Applications
There are a lot of ON Semiconductor MC100E016FN Counters & Dividers applications.
- Up Counters
- Fixed or Programmable Frequency Division
- Control counters
- Divide-by"N" counters/frequency synthesizers
- Decade counter/decimal decode display (CD4017B）
- LINEARIZATION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Communications Digital Frequency Synthesizers;
- Programmable binary and decade
- Analog multiplexing and demultiplexing
