MC100E016FNR2
| Parameters | |
|---|---|
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E016 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 8 |
| Propagation Delay | 900 ps |
| Turn On Delay Time | 900 ps |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 8 |
| fmax-Min | 700 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 700000000Hz |
| Count Rate | 900MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
MC100E016FNR2 Overview
A 28-LCC (J-Lead)package is used for this device. For its configuration, 28terminations are used. 5Vis fully flexible due to its voltage supply. In this diagram, there are 1elements that are interconnected by wires. The total number of component pins is 28. As a result, it is packaged in the way of a Tape & Reel (TR). Circuit components are connected with 28pins. To mount it, use the method of [0]. Having been designed as a member of the 100Eseries, it is well suited to a variety of applications. The logic type of Binary Counter is adopted. 0°C~85°Cis the recommended operating temperature. This device is mounted in the Surface Mountposition. When a supply voltage of 4.2V~5.7Vis provided, it can operate with greater reliability. In this device, there is information of 8bits. In terms of this electronic device, the features provided by NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vare of the utmost importance. Under its base part number of [0], you will find additional related parts. It is packed with [0]. In order to operate, it requires a voltage of [0]. Supply voltages can be as low as 4.2V volts (Vsup). Up to a maximum voltage of 5.7Vcan be supplied (Vsup). Input binary data is made by using the 8input lines.
MC100E016FNR2 Features
Embedded in the 28-LCC (J-Lead) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Operating supply voltage of 5V
MC100E016FNR2 Applications
There are a lot of ON Semiconductor MC100E016FNR2 Counters & Dividers applications.
- Timing applications
- Frequency division
- Dual Up Counters
- Divide-by"N" counters/frequency synthesizers
- TRUE RMS-TO-DC CONVERSION
- Programmable binary and decade
- Communications Digital Frequency Synthesizers;
- Divide-by-N counting
- Timers
- SQUARE ROOT
