MC100E136FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E136 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 6 |
| Propagation Delay | 1.45 ns |
| Turn On Delay Time | 1.45 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 6 |
| fmax-Min | 550 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 550000000Hz |
| Count Rate | 650MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E136FN Overview
28-LCC (J-Lead)is a package in which this device is packaged. 28 terminations are used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. There are wires connecting 1elements. In all, there are 28 pins on each component. As a result, it is packaged in the way of a Tube. Circuit components are connected with 28pins. Using [0], it can be mounted. Having been designed as a member of the 100Eseries, it is well suited for use in a wide range of applications. Binary Counteris selected as the logic type. It is recommended that the operating temperature be set to 0°C~85°C. Mounting type Surface Mountis used. As a result, the device operates more reliably when a supply voltage of 4.2V~5.7Vis applied. The device contains 6bits of information. You can find more related parts under its base part number of 100E136. In order to operate, it requires a voltage of [0]. In the case of the supply voltage (Vsup), it can be as low as 4.2V. A maximum supply voltage (Vsup) is available up to 5.7V. A total of 6input lines are used to input binary data in the form of on/off signals.
MC100E136FN Features
Embedded in the 28-LCC (J-Lead) package
Operating supply voltage of 5V
MC100E136FN Applications
There are a lot of ON Semiconductor MC100E136FN Counters & Dividers applications.
- Time Out Timer for Consumer-Application Industrial Controls
- Digital multiplexing and demultiplexing
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- LINEARIZATION
- VHF, UHF, FM, AM, etc.
- Fixed and programmable counters greater than 10
- Clocks
- Programmable binary and decade
- Communications Digital Frequency Synthesizers;
- counting/frequency sy nthesizers-BCD output
