MC100E136FNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E136 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 6 |
| Propagation Delay | 1.45 ns |
| Turn On Delay Time | 1.45 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 6 |
| fmax-Min | 550 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 550000000Hz |
| Count Rate | 650MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E136FNR2G Overview
This device is supplied in the 28-LCC (J-Lead) package. There are 28terminations used for configuring it. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. A wire connects the 1elements. A total of 28pins are available on all components. In this case, it is packaged as Tape & Reel (TR). In the circuit, there are 28pins that connect other components. It is mounted in the way of [0]. With its 100Eseries designation, it can be used for a range of applications. Logic type Binary Counter is adopted. It is recommended to set the operating temperature to 0°C~85°C. Mounting type Surface Mountis used. By providing the supply voltage of [0], it is capable of operating more reliably. This device contains information in 6bits. Using the Pbfree code, the result may be yes. Among its base part number [0], you will find additional parts that are related. Its packaging is provided by [0]. To operate, it requires a supply voltage of [0]. It is possible to supply the device with the minimum supply voltage (Vsup) of 4.2V. The maximum supply voltage (Vsup) is up to 5.7V. Input binary data is made by using the 6input lines.
MC100E136FNR2G Features
Embedded in the 28-LCC (J-Lead) package
Operating supply voltage of 5V
MC100E136FNR2G Applications
There are a lot of ON Semiconductor MC100E136FNR2G Counters & Dividers applications.
- Dual Up Counters
- ANALOG SIGNAL PROCESSING
- Frequency dividers
- Fixed and programmable counters greater than 10
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Fixed or Programmable Frequency Division
- MULTIPLICATION
- SQUARING
- Frequency dividing circuits
- Communications Digital Frequency Synthesizers;
