banner_page

MC100E137FNR2

1 Element 5V ECL QUAD Counters & Dividers 100E Series 28 Pins Up Positive, Negative 28-LCC (J-Lead)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MC100E137FNR2
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 498
  • Description: 1 Element 5V ECL QUAD Counters & Dividers 100E Series 28 Pins Up Positive, Negative 28-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Surface Mount YES
Operating Temperature 0°C~85°C
Packaging Tape & Reel (TR)
Series 100E
JESD-609 Code e0
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
Terminal Finish TIN LEAD
Additional Feature NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Technology ECL
Voltage - Supply 4.2V~5.5V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 28
Qualification Status COMMERCIAL
Number of Elements 1
Supply Voltage-Max (Vsup) 5.7V
Supply Voltage-Min (Vsup) 4.2V
Reset Asynchronous
Direction Up
Output Characteristics OPEN-EMITTER
Logic Type Binary Counter
Number of Bits per Element 8
Trigger Type Positive, Negative
Count Rate 2.2GHz
Height Seated (Max) 4.57mm
RoHS Status Non-RoHS Compliant

MC100E137FNR2 Overview


This device is supplied in the 28-LCC (J-Lead) package. The configuration of this device is based on 28terminations. This device is fully flexible due to the supply voltage of [0]. There are wires connecting 1elements. 28is the number of pins on all components. Tape & Reel (TR)is used to package it. Having been designed as a member of the 100Eseries, it is well suited to a variety of applications. It is adopted that the logic type is [0]. The operating temperature should be set at 0°C~85°C. Having a mounting type of [0], it is suitable for installation. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array has 8elements. Pbfree code may result in yes. When it comes to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V are much important features. In the case of the supply voltage (Vsup), it can be as low as 4.2V. Up to 5.7Vis the maximum supply voltage (Vsup).

MC100E137FNR2 Features


Embedded in the 28-LCC (J-Lead) package
8 bits per element
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V

MC100E137FNR2 Applications


There are a lot of Rochester Electronics, LLC MC100E137FNR2 Counters & Dividers applications.

  • Digital multiplexing and demultiplexing
  • Time Out Timer for Consumer-Application Industrial Controls
  • DIVISION
  • counting/frequency sy nthesizers-BCD output
  • SQUARE ROOT
  • Binary counter/decoder
  • Timers
  • Programmable decade counters
  • Frequency dividing circuits
  • SQUARING

Write a review

Note: HTML is not translated!
    Bad           Good