MC100E150FN
| Parameters | |
|---|---|
| Independent Circuits | 1 |
| Number of Output Lines | 6 |
| fmax-Min | 900 MHz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E150 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Circuit | 6:6 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 62mA |
| Number of Bits | 6 |
| Propagation Delay | 550 ps |
| Quiescent Current | 52mA |
| Turn On Delay Time | 375 ps |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 0.55 ns |
| Trigger Type | LOW LEVEL |
| High Level Output Current | -50mA |
| Low Level Output Current | 32mA |
MC100E150FN Overview
The package in which it is embedded is named 28-LCC (J-Lead). Tube is the packaging method. It is configured with an output of Differential. This electrical device has the logic type D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. A voltage of 4.2V~5.7V is used as the supply voltage for this device. A temperature of 0°C~85°C is used for operation. An FPGA of this type belongs to the 100E series. 6 Bits are used in the design of this electronic part. This device is designed with 28 terminations. The family it belongs to is 100E150. With a supply voltage of 5V, it operates. It is equipped with 28 pin count. There are 28 pins on it. This electronic part is mounted in the way of Surface Mount. The part is in the FF/Latches subcategory. 5.7V is the maximum voltage (Vsup) that can be supplied. A total of -4.5V power supplies are needed to run it. 6 output lines generate the binary equivalent of the input lines. Without external influences, it consumes 52mA of quiescent current. The superior flexibility of this circuit can be attributed to the use of 2 circuits. It is set to zero for the low level output current. -50mA is the high level output current.
MC100E150FN Features
28-LCC (J-Lead) package
100E series
6 Bits
100E150 family
28 pin count
28 pins
-4.5V power supplies
MC100E150FN Applications
There are a lot of ON Semiconductor MC100E150FN Latches applications.
- Parallel Output
- Serial Output Data Queuing
- Relay replacement
- Decade counting 7-segment decimal display
- Hammer Device Information
- Data acquisition
- Counters
- A/D converters
- Counter timers
- Timers
