MC100E150FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E150 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Circuit | 6:6 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 62mA |
| Number of Bits | 6 |
| Propagation Delay | 550 ps |
| Quiescent Current | 52mA |
| Turn On Delay Time | 375 ps |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 0.55 ns |
| Trigger Type | LOW LEVEL |
| High Level Output Current | -50mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Number of Output Lines | 6 |
| fmax-Min | 900 MHz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E150FNR2 Overview
The 28-LCC (J-Lead) package contains it. A package of Tape & Reel (TR) has been used. Differential is the output configured for it. A D-Type Transparent Latch logic type is used in this electrical device. Based on the way of Surface Mount, this electronic part is mounted. There is no supply voltage for this device. It is 0°C~85°C at the operating temperature. An FPGA of this type belongs to the 100E series. With this electronic part, there are 6 bits. In this device, there are 28 terminations. 100E150 is the family name of it. The device works with a voltage of 5V for its supply voltage. It has 28 pins that makes it easy to use. Designed with 28 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. The part is in the FF/Latches subcategory. It reaches 5.7V when the supply voltage (Vsup) reaches maximum. It operates from -4.5V power supplies. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. It follows that 6 output lines are generated from the binary equivalent of the input line. It consumes 52mA current from its quiescent state without being affected by external factors at all. 2 circuits are used to provide this superior level of flexibility. It is set to zero for the low level output current. -50mA is the high level output current.
MC100E150FNR2 Features
28-LCC (J-Lead) package
100E series
6 Bits
100E150 family
28 pin count
28 pins
-4.5V power supplies
MC100E150FNR2 Applications
There are a lot of ON Semiconductor MC100E150FNR2 Latches applications.
- Frequency dividing
- Serial Output Data Queuing
- Shift right register
- Parallel data storage
- Serial Input
- Counter timers
- TV Set-top Boxes
- High-speed logic
- Up/down difference counting
- Decade counting 7-segment decimal display
