MC100E150FNR2G
| Parameters | |
|---|---|
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 0.55 ns |
| Trigger Type | LOW LEVEL |
| High Level Output Current | -50mA |
| Low Level Output Current | 32mA |
| Power Supply Current-Max (ICC) | 72mA |
| Number of Output Lines | 6 |
| fmax-Min | 900 MHz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E150 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Circuit | 6:6 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Nominal Supply Current | 62mA |
| Number of Bits | 6 |
| Propagation Delay | 550 ps |
| Quiescent Current | 52mA |
| Turn On Delay Time | 375 ps |
MC100E150FNR2G Overview
The 28-LCC (J-Lead) package contains it. Packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Differential. There is D-Type Transparent Latch logic type for this electrical device. Electronic parts are mounted in accordance with Surface Mount. The voltage supply is 4.2V~5.7V. The operating temperature is 0°C~85°C. 100E is the series number of this FPGA. With this electronic part, there are 6 bits. This device has been designed with 28 terminations available. 100E150 is the family name of it. A 5V voltage supply is required for operation. The device is equipped with 28 pins. It is designed with 28 pins. The electronic part is mounted using the Surface Mount method. This part can be found within the FF/Latches subcategory. There is a maximum voltage supply (Vsup) that reaches 5.7V. The system is powered by -4.5V sources. It is recommended to have a higher supply voltage (Vsup) than 4.2V. Based on its reliable performance, this device is appropriate for TR. The binary equivalent of the input line is generated by 6 output lines. It consumes 52mA of quiescent current without being affected by outside factors. There are 1 elements in it. Additionally, it is characterized by NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V. Maximum power supply (ICC) for its operation is 72mA. In the low level output current, the value is set to 32mA. It is set to zero for the high level output current.
MC100E150FNR2G Features
28-LCC (J-Lead) package
100E series
6 Bits
100E150 family
28 pin count
28 pins
-4.5V power supplies
1 elements
MC100E150FNR2G Applications
There are a lot of ON Semiconductor MC100E150FNR2G Latches applications.
- Hammer
- Flip-flops
- A/D converters
- Automotive ADAS
- Parallel Output
- Buffer register
- Display
- Sample and hold register
- Double bus register system
- Serial Input
