MC100E151FNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E151 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Number of Circuits | 2 |
| Clock Frequency | 1.1GHz |
| Propagation Delay | 900 ps |
| Turn On Delay Time | 900 ps |
| Current - Quiescent (Iq) | 78mA |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Number of Bits per Element | 6 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 90mA |
| fmax-Min | 900 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E151FNR2G Overview
It is embeded in 28-LCC (J-Lead) case. The package Tape & Reel (TR)contains it. T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. Powered by a -4.2V~-5.7Vvolt supply, it operates as follows. A temperature of 0°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 100E series. A frequency of 1.1GHzshould be the maximum output frequency. In total, it contains 1 elements. There is 78mA quiescent consumption. A total of 28 terminations have been made. Members of the 100E151family make up this object. A voltage of 5V is used to power it. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 28 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.7V. Despite its superior flexibility, it relies on 2 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It operates from -4.5V power supplies.
MC100E151FNR2G Features
Tape & Reel (TR) package
100E series
28 pins
-4.5V power supplies
MC100E151FNR2G Applications
There are a lot of ON Semiconductor MC100E151FNR2G Flip Flops applications.
- Power down protection
- Communications
- ATE
- ESCC
- Circuit Design
- Control circuits
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- Storage Registers
- Patented noise
