MC100E164FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E164 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 1.1 ns |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.85 ns |
| Number of Input Lines | 16 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E164FN Overview
Providing this information in the 28-LCC (J-Lead) enables digital switch board space to be saved.The package is packaged in accordance with Tube.In terms of mounting, digital switch ic uses the Surface Mount method .Multiplexer is the analog IC that the multiplexers uses.By keeping the operating temperature at 0°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at ±4.2V~5.7V, designers are provided with a greater degree of flexibility.Multiplexers in the 100E series are suitable for a wide range of applications.Its basic configuration includes terminations in the 28 range.There is a base part number of 100E164 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 28 components that can be connected to each pin.As the end of conductors, it uses J BEND.Its supply type is Dual, which is used as the source of power.This multiplexer ic has 28 pins configured.This unit is mounted in the way of Surface Mount.To avoid unnecessary failures, keep the supply voltage at 4.2V (Vsup).The maximal supply voltage (Vsup) should be kept at 5.7V to avoid some unnecessary failures.Normally, -4.5V is powered by a battery.As a result, the turn signal switch consists of 1 outputs.It is possible to accept voltage levels through 16 input lines of multiplexers.Furthermore, the characteristics of NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V have been improved.
MC100E164FN Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -4.5V
16 input lines
NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V
MC100E164FN Applications
There are a lot of ON Semiconductor MC100E164FN Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Encrypted communications system
- Logic gates for other digital devices
- Data communication
- Analog to digital conversion
- Medical industry
- Speed control of medern motors
- Control unit of Central Processing unit (CPU)
- Recording transmission
- Computer memory
