MC100E164FNG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E164 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 1.1 ns |
| Logic Function | Mux |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.85 ns |
| Number of Input Lines | 16 |
| Voltage Supply Source | Dual Supply |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E164FNG Overview
As a means of saving space, digital switch is provided in the 28-LCC (J-Lead).The package is in the form of Tube.Digital switch ic adheres to a mounting method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.In the case of 0°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of ±4.2V~5.7V.provides digital controlled switch's digital controlled switch'sMultiplexers from the 100E series can be used in a wide range of applications.Among its basic configurations are 28 terminations.As its base part number is 100E164, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch consists of 28 component pins.It employs J BEND as the point at which conductors come to an end.In this case, Dual is employed as the supply type.A total of 28 pins are configured on this board.The mounting point is Surface Mount.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.2V.Keeping Vsup at 5.7V will prevent some unnecessary failures.For mux switch's normal operation, power supply -4.5V is provided.The turn signal switch has 1 outputs.A voltage level can be inserted into the 16 input lines of multiplexers.In addition, it provides improved characteristics compared to NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V.
MC100E164FNG Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -4.5V
16 input lines
NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V
MC100E164FNG Applications
There are a lot of ON Semiconductor MC100E164FNG Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Speed control of medern motors
- Analog to digital conversion
- Code converters
- Injectors
- To select different devices in microprocessor output
- PCIe
- Data-routing applications
- Microprocessor instruction decoding
- Data distribution
