MC100E164FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E164 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 1.1 ns |
| Logic Function | Mux |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.85 ns |
| Number of Input Lines | 16 |
| Voltage Supply Source | Dual Supply |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E164FNR2 Overview
In order to conserve board space, digital switch is included in the 28-LCC (J-Lead).Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.As long as the operating temperature is 0°C~85°C, turn signal switch will not be influenced by external factors.With a supply voltage of ±4.2V~5.7V, designers have greater flexibility of digital controlled switch.Since they are members of the 100E series, they can be used in a wide variety of applications.This configuration includes 28 terminations as part of its basic functionality.The base part number is 100E164, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.This turn signal switch contains 28 component pins.J BEND represents the end of conductors.The supply type of this multiplexer ic is Dual.With 28 pins, it is configured.It is mounted in the way of Surface Mount.Keep Vsup at 4.2V to avoid unnecessary failures.The maximal supply voltage (Vsup) should be kept at 5.7V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at -4.5V.There are 1 outputs designed for the operation of the turn signal switch.The signal switching is packaged by TAPE AND REEL. A voltage level can be inserted into the 16 input lines of multiplexers.Additionally, NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V has improved characteristics.
MC100E164FNR2 Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -4.5V
16 input lines
NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V
MC100E164FNR2 Applications
There are a lot of ON Semiconductor MC100E164FNR2 Signal Switches / Multiplexers / Decoders applications.
- Code converters
- To select different devices in microprocessor input
- High-performance memory-decoding applications
- Relay
- Make half adder
- Speed control of medern motors
- Recording transmission
- Data collection system
- Enabling block of memory depending on address in memory chips
- LVDS
