MC100E164FNR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E164 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Circuit | 1 x 16:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 1.1 ns |
| Logic Function | Multiplexer, Mux |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.85 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 16 |
| Voltage Supply Source | Dual Supply |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E164FNR2G Overview
It is included in the 28-LCC (J-Lead) in order to save board space.Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC is indicated by Multiplexer.In the case of 0°C~85°C, turn signal switch will not be affected by external factors.Using a ±4.2V~5.7V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 100E series, the multiplexers can be used for a wide range of applications.It is designed with 28 terminations as part of its basic configuration.The base part number is 100E164, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.There are 28 component pins in this turn signal switch.Conductors terminate at J BEND in this design.There is a type of supply Dual that is employed in this case.With 28 pins, it is configured.The mounting is in the way of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 4.2V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 5.7V so as to avoid some unnecessary failures.It is provided that -4.5V has a power supply in order to function normally.The turn signal switch has 1 outputs designed for operation.The switches package is packaged in accordance with the TAPE AND REEL method.It is possible to accept voltage levels by using one of the 16 input lines of multiplexers.In addition, it provides improved features of NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V.
MC100E164FNR2G Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -4.5V
16 input lines
NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V
MC100E164FNR2G Applications
There are a lot of ON Semiconductor MC100E164FNR2G Signal Switches / Multiplexers / Decoders applications.
- Small scale TV wall
- Used to connect a single source to multiple destinations
- Control unit of Central Processing unit (CPU)
- Implementing boolean functions with multiple variables
- Microprocessor instruction decoding
- Medical industry
- Robotic vehicles
- Night vision cameras
- Recording transmission
- Data collection system
