MC100E171FNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Differential Digital Multiplexer |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.5V -4.2V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E171 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Circuit | 3 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Bits | 3 |
| Propagation Delay | 650 ps |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 12 |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.65 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 77mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E171FNR2G Overview
This is a relatively small item of digital switch that is included in the 28-LCC (J-Lead) in order to save space on the board.The package is in the form of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Differential Digital Multiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at 0°C~85°C.When operated with a 4.2V~5.5V -4.2V~-5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 100E series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 28 terminations.Its logic switch base part number is 100E171 which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 28 can be found on this turn signal switch.Using the point J BEND as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Dual, which is used as the source of power.This multiplexer ic is configured with 28 pins.The mounting is in the way of Surface Mount.There are 3 bits in signal multiplexer.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.This turn signal switch has 1 outputs designed for its operation.I would classify the digital switch ic as an electronic part belonging to the Multiplexer/Demultiplexers category.It is provided with 12 inputs.In accordance with TAPE AND REEL, switches can be packaged.As a voltage level input, the multiplexers have 4 lines.
MC100E171FNR2G Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
4 input lines
MC100E171FNR2G Applications
There are a lot of ON Semiconductor MC100E171FNR2G Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- VGA
- LVDS
- Time division multiplexing system
- Encrypted communications system
- Idle motor
- Medical industry
- Decimal decoder
- Used to connect a single source to multiple destinations
- Microprocessor memory systems
