MC100E175FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E175 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Number of Circuits | 3 |
| Nominal Supply Current | 132mA |
| Number of Bits | 9 |
| Propagation Delay | 975 ps |
| Quiescent Current | 110mA |
| Turn On Delay Time | 800 ps |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| fmax-Min | 700 MHz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E175FN Overview
Package 28-LCC (J-Lead) includes it. As a result, it has a packaging of Tube. The output it is configured with uses Standard. A D-Type Transparent Latch logic type is used in this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates with a supply voltage of 4.2V~5.5V. There is 0°C~85°C operating temperature. The 100E series contains FPGAs of this type. There are 9 bits in this electronic part. As far as this device is concerned, it has no terminations. The family in which it belongs to is 100E175. The supply voltage of the device is 5V. 28 pins are available on it. 28 pins are used in its design. It is mounted according to the Surface Mount method. It belongs to the subcategory of FF/Latches. 5.5V is the maximum supply voltage (Vsup). There are -4.5V power supplies required for this machine to operate. Input Lines consist of electronic circuits, and there are 2. The current consumed by the device is 110mA volts in quiescent mode, which cannot be affected by external factors. It achieves superior flexibility by using 3 circuits.
MC100E175FN Features
28-LCC (J-Lead) package
100E series
9 Bits
100E175 family
28 pin count
28 pins
-4.5V power supplies
MC100E175FN Applications
There are a lot of ON Semiconductor MC100E175FN Latches applications.
- Decade counting 7-segment decimal display
- Display
- Counter timers
- Timers
- Parallel data storage
- Pseudo-random code generators
- Buffer register
- Pattern Generators
- Parallel data storage
- Registers
