MC100E431FNR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 2 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E431 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Clock Frequency | 1.1GHz |
| Propagation Delay | 850 ps |
| Turn On Delay Time | 700 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 132mA |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Number of Bits per Element | 1 |
| Trigger Type | Positive, Negative |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E431FNR2G Overview
The item is packaged in 28-LCC (J-Lead)cases. It is contained within the Tape & Reel (TR)package. The output it is configured with uses Differential. The trigger it is configured with uses Positive, Negative. It is mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis required for its operation. It is operating at a temperature of 0°C~85°C TA. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 100Eseries of FPGAs. You should not exceed 1.1GHzin its output frequency. During its operation, it consumes 132mA quiescent energy. A total of 28terminations have been recorded. The object belongs to the 100E431 family. A voltage of 5V is used to power it. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 28pins on it. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. As soon as 5.7Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 4.2V. The superior flexibility of this product is achieved by using 3 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. In order for the device to operate, it requires -4.5V power supplies. In addition, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis a characteristic of it.
MC100E431FNR2G Features
Tape & Reel (TR) package
100E series
28 pins
-4.5V power supplies
MC100E431FNR2G Applications
There are a lot of ON Semiconductor MC100E431FNR2G Flip Flops applications.
- Buffered Clock
- Data storage
- 2 – Bit synchronous counter
- Frequency Dividers
- ESD performance
- Memory
- Latch
- Instrumentation
- Bounce elimination switch
- Differential Individual
