MC100E457FN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 100E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | TIN LEAD |
| Additional Feature | NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-J28 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Circuit | 3 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Inputs | 2 |
| Output Characteristics | OPEN-EMITTER |
| Output Polarity | COMPLEMENTARY |
| Propagation Delay (tpd) | 0.7 ns |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
MC100E457FN Overview
In order to save board space, digital switch is located in the 28-LCC (J-Lead).The package is packaged in accordance with Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at ±4.2V~5.7V, designers are provided with a greater degree of flexibility.Several applications are possible for 100E series multiplexers.There are 28 terminations included in its basic configuration.For multiplexer's system, 5V voltage is supplied.A component pin count of 28 is found on this turn signal switch.Conductors terminate at J BEND in this design.Vsup should be kept at 4.2V to prevent some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.7V.As part of the operation of this turn signal switch, there are 1 outputs.In this multiplexer, there is a total of 2 inputs.In addition, it provides improved features of NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V.
MC100E457FN Features
Supplied in the 28-LCC (J-Lead) package
NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V
MC100E457FN Applications
There are a lot of Rochester Electronics, LLC MC100E457FN Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- CPU memory location identification
- Injectors
- Implementing boolean functions with multiple variables
- Microprocessor instruction decoding
- VGA
- Analog to digital conversion
- Communication system
- Textile mills
- A robotic vehicle with the metal detector
