MC100E457FNG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E457 |
| Pin Count | 28 |
| Circuit | 3 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Throw Configuration | SPDT |
| Propagation Delay | 700 ps |
| Logic Function | Multiplexer, Mux |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| Prop. Delay@Nom-Sup | 0.7 ns |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 6 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E457FNG Overview
Due to the fact that it is provided in the 28-LCC (J-Lead), digital switch allows the board to be compacted.It is packaged in the way of Tube.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at ±4.2V~5.7V voltage.Since they are members of the 100E series, they can be used in a wide variety of applications.As parts of its basic configuration, 28 terminations are desgined.To find signal switch's related components, a base part number of 100E457 may also be used.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 28 components that can be connected to each pin.J BEND represents the end of conductors.Dual is employed as its supply type.Currently, it is configured with 28 pins.The mounting point is Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 4.2V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 5.7V to prevent unnecessary failures.In order to maintain mux switch's normal operation, power is provided to -4.5V.It is possible to accept voltage levels by using one of the 6 input lines of multiplexers.There are 3 output lines on the signal source.Additionally, NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V provides improved characteristics.
MC100E457FNG Features
Supplied in the 28-LCC (J-Lead) package
Adopting a supply type of Dual
Power supplies of -4.5V
6 input lines
3 output lines
NECL MODE OPERATING RANGE: VEE = -4.2 V TO -5.7 V WITH VCC = 0 V
MC100E457FNG Applications
There are a lot of ON Semiconductor MC100E457FNG Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Decimal decoder
- A/D converters
- HD surveillance system
- To select different devices in microprocessor output
- Make full adder
- Data demultiplexing
- Time division multiplexing system
- Communication system
- Code converters
