MC100EL31D
| Parameters | |
|---|---|
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.2V~5.7V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Clock Frequency | 2.8GHz |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 100EL |
MC100EL31D Overview
The flip flop is packaged in 8-SOIC (0.154, 3.90mm Width). It is contained within the Tubepackage. As configured, the output uses Differential. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.2V~5.7Vvolts. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 100ELseries of FPGAs. Its output frequency should not exceed 2.8GHz. A total of 1elements are present in it.
MC100EL31D Features
Tube package
100EL series
MC100EL31D Applications
There are a lot of Rochester Electronics, LLC MC100EL31D Flip Flops applications.
- Frequency Divider circuits
- Single Up Count-Control Line
- Reduced system switching noise
- Divide a clock signal by 2 or 4
- Digital electronics systems
- Patented noise
- Data Synchronizers
- Computing
- CMOS Process
- Buffer registers
