MC100EL31DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100EL31 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 590 ps |
| Turn On Delay Time | 465 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 37mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100EL31DT Overview
It is packaged in the way of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A package named Tubeincludes it. T flip flop uses Differentialas its output configuration. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of -4.2V~-5.7V. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. FPGAs belonging to the 100ELseries contain this type of chip. You should not exceed 2.8GHzin its output frequency. As a result, it consumes 32mA of quiescent current without being affected by external factors. There have been 8 terminations. This D latch belongs to the family of 100EL31. The power source is powered by 5V. It is mounted by the way of Surface Mount. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part with 1bits has been designed. In this case, the maximum supply voltage (Vsup) reaches 5.7V. The supply voltage (Vsup) should be maintained above 4.2V for normal operation. To achieve this superior flexibility, 1 circuits are used. As a result of its reliable performance, this T flip flop is suitable for RAIL. The system runs on a power supply of -4.5V watts. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V on the electronic flip flop that can be referred to.
MC100EL31DT Features
Tube package
100EL series
1 Bits
-4.5V power supplies
MC100EL31DT Applications
There are a lot of ON Semiconductor MC100EL31DT Flip Flops applications.
- Computing
- Automotive
- Frequency Dividers
- Synchronous counter
- Parallel data storage
- Differential Individual
- Data transfer
- Balanced 24 mA output drivers
- Set-reset capability
- QML qualified product
