MC100EL31DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL31 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 590 ps |
| Turn On Delay Time | 465 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 37mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EL31DTR2G Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is the way it is packaged. The Tape & Reel (TR)package contains it. The output it is configured with uses Differential. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at -4.2V~-5.7Vvolts. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 100EL series. A frequency of 2.8GHzshould not be exceeded by its output. It consumes 32mA of quiescent current without being affected by external factors. There are 8 terminations,The object belongs to the 100EL31 family. An input voltage of 5Vpowers the D latch. There is an electronic part that is mounted in the way of Surface Mount. 8pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. The design is based on 1bits. It reaches 5.7Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 4.2V. Despite its superior flexibility, it relies on 1 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The D latch operates on -4.5V volts. Additionally, you may refer to the D latch's additional NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC100EL31DTR2G Features
Tape & Reel (TR) package
100EL series
8 pins
1 Bits
-4.5V power supplies
MC100EL31DTR2G Applications
There are a lot of ON Semiconductor MC100EL31DTR2G Flip Flops applications.
- Divide a clock signal by 2 or 4
- Parallel data storage
- Safety Clamp
- Differential Individual
- Computing
- Consumer
- Synchronous counter
- Latch
- Supports Live Insertion
- Set-reset capability
