MC100EL32DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL32 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 690 ps |
| Turn On Delay Time | 690 ps |
| Reset | Asynchronous |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 35mA |
| fmax-Min | 2600 MHz |
| Max Frequency@Nom-Sup | 2600000000Hz |
| Count Rate | 3GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EL32DR2G Overview
It is a device supplied in the 8-SOIC (0.154, 3.90mm Width) package. 8 terminations are used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. The device contains 1terminations. In total, there are 8pins on the component. Packaging is based on Tape & Reel (TR). In the circuit, 8pins are used to connect other components. It is mounted using the way of [0]. Having been designed as a member of the 100ELseries, it is well suited to a variety of applications. It is adopted that the logic type is [0]. It is recommended to set the operating temperature to -40°C~85°C. Mounting type Surface Mountis used. In the case of a supply voltage of [0], it operates more reliably. In terms of Pbfree code, the result may be yes. When it comes to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V are much important features. Under its base part number of [0], you will find additional related parts. As a result of the voltage source, there is -4.5V voltage. In the case of the supply voltage (Vsup), it can be as low as 4.2V. It is possible to reach a maximum supply voltage of 5.7VV (Vsup). The electronic part belongs to the Prescaler/Multivibrators family. The device has a configuration of 1 data/clock inputs.
MC100EL32DR2G Features
Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC100EL32DR2G Applications
There are a lot of ON Semiconductor MC100EL32DR2G Counters & Dividers applications.
- MULTIPLICATION
- Time delay circuits
- Divide-by-N counting
- Frequency division
- Timers
- Programmable decade counters
- Fixed or Programmable Frequency Division
- ANALOG SIGNAL PROCESSING
- Up Counters
- Frequency dividers
