MC100EL32DT
| Parameters | |
|---|---|
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100EL32 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Reset | Asynchronous |
| Direction | Up |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.6 ns |
| Power Supply Current-Max (ICC) | 35mA |
| fmax-Min | 2600 MHz |
| Max Frequency@Nom-Sup | 2600000000Hz |
| Count Rate | 3GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
MC100EL32DT Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is a package in which this device is packaged. This configuration uses 8terminations. This device is fully flexible due to the supply voltage of [0]. The 1elements are connected by wires. A total of 8pins are present on all components. There is a package in the form of Tube. As a member of 100EL series, it is well suited for various applications. It is assumed that the logic type is [0]. The operating temperature should be set at -40°C~85°C. This device is mounted in the Surface Mountposition. It is able to operate with higher reliability when the supply voltage of 4.2V~5.7V is provided. These electronic devices have many important features, and NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis one of them. There are more related parts under the 100EL32base part number. In this case, -4.5Vvoltage is generated by the voltage source. It is possible to supply the device with the minimum supply voltage (Vsup) of 4.2V. Up to 5.7Vis the maximum supply voltage (Vsup). This part is from the family [0]. 1inputs are configured for data/clock.
MC100EL32DT Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC100EL32DT Applications
There are a lot of ON Semiconductor MC100EL32DT Counters & Dividers applications.
- Fixed and programmable counters greater than 10
- MULTIPLICATION
- LINEARIZATION
- Time-delay circuits
- Clocks
- SQUARING
- Programmable binary and decade
- VHF, UHF, FM, AM, etc.
- Frequency division
- Frequency dividers
