MC100EL32DTG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL32 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Reset | Asynchronous |
| Direction | Up |
| Logic Type | Divide-by-2 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.6 ns |
| Power Supply Current-Max (ICC) | 35mA |
| fmax-Min | 2600 MHz |
| Max Frequency@Nom-Sup | 2600000000Hz |
| Count Rate | 3GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
MC100EL32DTG Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)package, it is supplied. It is configured using 8terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. The 1elements are connected by wires. A total of 8pins are available on all components. In this case, it is packaged as Tube. Due to its membership in the 100ELseries, it is suitable for a variety of applications. It is assumed that the logic type is [0]. -40°C~85°Cis the recommended operating temperature. This device is mounted in the Surface Mountposition. It is able to operate with higher reliability when the supply voltage of 4.2V~5.7V is provided. Pbfree code may produce the result yes. In regard to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vare essential features. Under its base part number of [0], you will find additional related parts. There is -4.5V voltage comes from the voltage source. There is 4.2V minimum supply voltage (Vsup) for this device. It is possible to reach a maximum supply voltage of 5.7VV (Vsup). The part is from Prescaler/Multivibrators family. The device is configured with a clock and data input of 1.
MC100EL32DTG Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC100EL32DTG Applications
There are a lot of ON Semiconductor MC100EL32DTG Counters & Dividers applications.
- DIVISION
- Programmable binary and decade
- Dual Up Counters
- LINEARIZATION
- Binary counter/decoder
- Programmable decade counters
- ALGEBRAIC COMPUTATION
- TRUE RMS-TO-DC CONVERSION
- VHF, UHF, FM, AM, etc.
- Time-delay circuits
