MC100EL33DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | Prescaler/Multivibrators |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL33 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Reset | Asynchronous |
| Halogen Free | Halogen Free |
| Logic Type | Divide-by-4 |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 33mA |
| Count Rate | 4.2GHz |
| Number of Data/Clock Inputs | 1 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EL33DTR2G Overview
This device is supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. The configuration of this device is based on 8terminations. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. There are 1 terminations on the device. In all, there are 8 pins on each component. As a result, it is packaged as Tape & Reel (TR). In the circuit, there are 8pins that connect other parts. It is mounted using the way of [0]. Having been designed as a member of the 100ELseries, it is well suited for use in a wide range of applications. Divide-by-4is adopted as the logic type. Setting the operating temperature to -40°C~85°C is recommended. The mounting type is Surface Mount. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. As far as Pbfree code is concerned, the result may be yes. When it comes to this electronic device, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V are much important features. Under its base part number of [0], you will find additional related parts. Voltage from the voltage source is [0]. It is possible to supply the device with the minimum supply voltage (Vsup) of 4.2V. Up to 5.7Vis the maximum supply voltage (Vsup). This electronic component is from the Prescaler/Multivibrators family. 1inputs are configured for data/clock.
MC100EL33DTR2G Features
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
MC100EL33DTR2G Applications
There are a lot of ON Semiconductor MC100EL33DTR2G Counters & Dividers applications.
- Time Out Timer for Consumer-Application Industrial Controls
- Time delay circuits
- Digital multiplexing and demultiplexing
- ALGEBRAIC COMPUTATION
- Counter control/timers
- SQUARING
- Up Counters
- TRUE RMS-TO-DC CONVERSION
- Binary counter/decoder
- Analog multiplexing and demultiplexing
