MC100EL35DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100EL35 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | +-5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 2 |
| Clock Frequency | 2.2GHz |
| Propagation Delay | 700 ps |
| Turn On Delay Time | 525 ps |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Prop. Delay@Nom-Sup | 0.745 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 37mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100EL35DT Overview
As a result, it is packaged as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). D flip flop is included in the Tubepackage. It is configured with Differentialas an output. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a -4.2V~-5.7Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. D-Typeis the type of this D latch. It belongs to the 100ELseries of FPGAs. You should not exceed 2.2GHzin the output frequency of the device. As a result, it consumes 32mA quiescent current and is not affected by external forces. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 100EL35. A voltage of 5V provides power to the D latch. There is an electronic component mounted in the way of Surface Mount. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. This flip flop is designed with 2 Bits. 5.7Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 4.2V. Using 1 circuits, it is highly flexible. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. A power supply of +-5Vis required to operate it. NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis also one of its characteristics.
MC100EL35DT Features
Tube package
100EL series
2 Bits
+-5V power supplies
MC100EL35DT Applications
There are a lot of ON Semiconductor MC100EL35DT Flip Flops applications.
- Computers
- Counters
- Synchronous counter
- Buffer registers
- Guaranteed simultaneous switching noise level
- Pattern generators
- Memory
- Buffered Clock
- Shift Registers
- ESD protection
