MC100EL35DTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL35 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | +-5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 2 |
| Clock Frequency | 2.2GHz |
| Propagation Delay | 700 ps |
| Turn On Delay Time | 525 ps |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 32mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.745 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 37mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EL35DTR2G Overview
It is embeded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. D flip flop is included in the Tape & Reel (TR)package. Differentialis the output configured for it. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to -4.2V~-5.7V. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 100EL series. A frequency of 2.2GHzshould not be exceeded by its output. As a result, it consumes 32mA of quiescent current without being affected by external factors. 8terminations have occurred. The 100EL35family includes it. The power source is powered by 5V. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 8. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 2 Bits. 5.7Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 4.2V for normal operation. Its superior flexibility is attributed to its use of 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. An electrical current of +-5V volts is applied to it. As an additional reference, you may refer to electronic flip flop NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC100EL35DTR2G Features
Tape & Reel (TR) package
100EL series
8 pins
2 Bits
+-5V power supplies
MC100EL35DTR2G Applications
There are a lot of ON Semiconductor MC100EL35DTR2G Flip Flops applications.
- Single Up Count-Control Line
- Data Synchronizers
- 2 – Bit synchronous counter
- Data storage
- Asynchronous counter
- Load Control
- Cold spare funcion
- Dynamic threshold performance
- Automotive
- Counters
