MC100EL35MNR4G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL35 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | +-5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 2 |
| Clock Frequency | 2.2GHz |
| Propagation Delay | 745 ps |
| Turn On Delay Time | 525 ps |
| Current - Quiescent (Iq) | 32mA |
| Halogen Free | Halogen Free |
| Prop. Delay@Nom-Sup | 0.745 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 37mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EL35MNR4G Overview
The package is in the form of 8-VFDFN Exposed Pad. Package Tape & Reel (TR)embeds it. T flip flop is configured with an output of Differential. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of -4.2V~-5.7V. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 100ELseries contain this type of chip. You should not exceed 2.2GHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 32mA quiescent energy. A total of 8 terminations have been made. The 100EL35 family contains this object. It is powered from a supply voltage of 5V. A part of the electronic system is mounted in the way of Surface Mount. With its 8pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. 2bits are used in its design. Vsup reaches 5.7V, the maximal supply voltage. The supply voltage (Vsup) should be kept above 4.2V for normal operation. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The power supply is +-5V. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vas a characteristic.
MC100EL35MNR4G Features
Tape & Reel (TR) package
100EL series
8 pins
2 Bits
+-5V power supplies
MC100EL35MNR4G Applications
There are a lot of ON Semiconductor MC100EL35MNR4G Flip Flops applications.
- Data storage
- Memory
- Frequency Dividers
- Shift Registers
- Counters
- Digital electronics systems
- Differential Individual
- Frequency division
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter
