MC100EL52DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL52 |
| Function | Standard |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Output Current | 50mA |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Max Input Voltage | 4.12V |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 29mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EL52DG Overview
8-SOIC (0.154, 3.90mm Width)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Differential. Positive, Negativeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of -4.2V~-5.7V volts. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The 100ELseries comprises this type of FPGA. It should not exceed 2.8GHzin terms of its output frequency. T flip flop consumes 25mA quiescent energy. The number of terminations is 8. It is a member of the 100EL52 family. A voltage of 5V is used to power it. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 8pins on it. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. The design is based on 1bits. It reaches 5.7Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 4.2V. To achieve this superior flexibility, 1 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with RAIL. The D latch operates on -4.5V volts. In addition to its maximum design flexibility, the output current of the T flip flop is 50mA. Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V of the electronic flip flop.
MC100EL52DG Features
Tube package
100EL series
8 pins
1 Bits
-4.5V power supplies
MC100EL52DG Applications
There are a lot of ON Semiconductor MC100EL52DG Flip Flops applications.
- Balanced 24 mA output drivers
- Single Down Count-Control Line
- Memory
- Load Control
- ATE
- Cold spare funcion
- Convert a momentary switch to a toggle switch
- Control circuits
- Storage Registers
- ESD protection
