MC100EL52DR2G
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 29mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EL |
MC100EL52DR2G Overview
8-SOIC (0.154, 3.90mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Differential. It is configured with a trigger that uses Positive, Negative. Surface Mountis positioned in the way of this electronic part. Powered by a -4.2V~-5.7Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 100EL series. A frequency of 2.8GHzshould be the maximum output frequency. Despite external influences, it consumes 25mAof quiescent current. There are 8 terminations,The 100EL52family includes it. It is powered from a supply voltage of 5V. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 1bits are used in this part. It reaches 5.7Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be above 4.2V. The superior flexibility of this product is achieved by using 1 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. In order for the device to operate, it requires -4.5V power supplies. In addition, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis a characteristic of it. It is set to 50mAfor the high level output current. It is set to 50mAfor low level output current.
MC100EL52DR2G Features
Tape & Reel (TR) package
100EL series
8 pins
1 Bits
-4.5V power supplies
MC100EL52DR2G Applications
There are a lot of ON Semiconductor MC100EL52DR2G Flip Flops applications.
- Dynamic threshold performance
- Pattern generators
- Reduced system switching noise
- Frequency division
- Clock pulse
- Guaranteed simultaneous switching noise level
- 2 – Bit synchronous counter
- Safety Clamp
- Divide a clock signal by 2 or 4
- Convert a momentary switch to a toggle switch
