MC100EL52DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100EL52 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 29mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100EL52DT Overview
The item is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)cases. You can find it in the Tubepackage. In the configuration, Differentialis used as the output. In the configuration of the trigger, Positive, Negativeis used. Surface Mountmounts this electrical part. Powered by a -4.2V~-5.7Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 100ELseries comprises this type of FPGA. Its output frequency should not exceed 2.8GHz. During its operation, it consumes 25mA quiescent energy. There have been 8 terminations. If you search by 100EL52, you will find similar parts. It is powered from a supply voltage of 5V. This electronic part is mounted in the way of Surface Mount. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 1. In this case, the maximum supply voltage (Vsup) reaches 5.7V. It is imperative that the supply voltage (Vsup) is maintained above 4.2Vin order to ensure normal operation. Despite its superior flexibility, it relies on 1 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for RAIL. A total of -4.5V power supplies are needed to run it. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vas a characteristic.
MC100EL52DT Features
Tube package
100EL series
1 Bits
-4.5V power supplies
MC100EL52DT Applications
There are a lot of ON Semiconductor MC100EL52DT Flip Flops applications.
- ESD performance
- EMI reduction circuitry
- ESD protection
- Circuit Design
- Individual Asynchronous Resets
- Communications
- Frequency Dividers
- Frequency division
- Test & Measurement
- ATE
