MC100EL52DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 29mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EL52DTG Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is the way it is packaged. The package Tubecontains it. The output it is configured with uses Differential. It is configured with a trigger that uses Positive, Negative. The electronic part is mounted in the way of Surface Mount. A voltage of -4.2V~-5.7Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 100EL series. A frequency of 2.8GHzshould not be exceeded by its output. As a result, it consumes 25mA quiescent current and is not affected by external forces. A total of 8terminations have been recorded. If you search by 100EL52, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. Electronic part Surface Mountis mounted in the way. It is designed with 8 pins. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 1bits is used in this application. It reaches 5.7Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 4.2V. Its superior flexibility is attributed to its use of 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. The D latch operates on -4.5V volts. Additionally, it is characterized by NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC100EL52DTG Features
Tube package
100EL series
8 pins
1 Bits
-4.5V power supplies
MC100EL52DTG Applications
There are a lot of ON Semiconductor MC100EL52DTG Flip Flops applications.
- Parallel data storage
- ESCC
- Pattern generators
- Matched Rise and Fall
- Functionally equivalent to the MC10/100EL29
- CMOS Process
- Modulo – n – counter
- Cold spare funcion
- High Performance Logic for test systems
- Patented noise
