MC100EL58DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100EL58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Throw Configuration | DPST |
| Propagation Delay | 340 ps |
| Quiescent Current | 14mA |
| Logic Function | Mux |
| Supply Type | Dual |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100EL58DT Overview
For the purpose of saving board space, digital switch is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).It is packaged according to the Tube method.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a ±4.2V~5.7V supply voltage, which gives it a lot of flexibility.Since they are members of the 100EL series, they can be used in a wide variety of applications.There are 8 terminations included in its basic configuration.There is a base part number of 100EL58 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 8 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Dual is used as its supply type.A total of 8 pins are configured on this board.The mounting point is Surface Mount.It is advisable to keep the maximum supply voltage (Vsup) at 5.7V so as to avoid some unnecessary failures.mux switch's normal operation requires the power supply of -4.5V.The turn signal switch has 1 outputs designed for operation.Without the influence of external factors, it consumes 14mA current of multiplexer ic.Currently, the switches is packaged in accordance with the RAIL method.It is possible to accept voltage levels through 2 input lines of multiplexers.
MC100EL58DT Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Dual
Power supplies of -4.5V
2 input lines
MC100EL58DT Applications
There are a lot of ON Semiconductor MC100EL58DT Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Video transmission
- Analog to digital conversion
- Decimal decoder
- Idle motor
- Night vision cameras
- Speed synchronization of multiple motors in industries
- Medium scale TV wall
- Data bus control
- D/A converters
