MC100EL58DTG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 100EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Terminal Finish | Tin (Sn) |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EL58 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Throw Configuration | DPST |
| Propagation Delay | 340 ps |
| Logic Function | Multiplexer, Mux |
| Halogen Free | Halogen Free |
| Supply Type | Dual |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100EL58DTG Overview
In order to conserve board space, digital switch is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).It is packaged according to the Tube method.Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Multiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with ±4.2V~5.7V voltage.Multiplexers of the 100EL series can be used in a wide range of applications.As part of its basic configuration, 8 terminations are designed as a part of it.The base part number is 100EL58, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.There are 8 component pins in this turn signal switch.As a result, conductors end at GULL WING.In this case, the supply type is Dual.A total of 8 pins are configured on this board.The mounting point is Surface Mount.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.7V.Normally, -4.5V is powered by a battery.The turn signal switch operates with 1 outputs.The switches packaging is based on RAIL.It is possible to accept voltage levels by using one of the 2 input lines of multiplexers.
MC100EL58DTG Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Dual
Power supplies of -4.5V
2 input lines
MC100EL58DTG Applications
There are a lot of ON Semiconductor MC100EL58DTG Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Arithmetic Logic Units
- Small scale TV wall
- Enabling different functions units in microprocessor instruction decoding
- High-performance memory-decoding applications
- Communication system
- Injectors
- Microprocessor memory systems
- Relay
- A/D converters
