MC100EL59DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100EL |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Multiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Packing Method | RAIL |
| Technology | ECL |
| Voltage - Supply | ±4.2V~5.7V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100EL59 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Circuit | 3 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Number of Circuits | 3 |
| Throw Configuration | DPST |
| Propagation Delay | 690 ps |
| Quiescent Current | 27mA |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 6 |
| Output Characteristics | OPEN-EMITTER |
| Supply Type | Dual |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100EL59DW Overview
Digital switch is provided in the 20-SOIC (0.295, 7.50mm Width) for the purpose of saving board space.Tube is the method used for packaging.digital switch ic uses the method of Surface Mount for mounting.A digital IC Multiplexer is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a ±4.2V~5.7V supply voltage.These multiplexers are members of the 100EL series, which provide extensive application potential.Its basic configuration includes terminations in the 20 range.Its logic switch base part number is 100EL59 which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has a total of 20 component pins.As the end of conductors, it uses GULL WING.Dual is used as its supply type.Currently, it is configured with a 20 pin configuration.Surface Mount is the way it is mounted.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.7V.The power supply of -4.5V is provided for mux switch's normal operation.For the turn signal switch's operation, there are 1 outputs.Without the influence of external factors, it consumes 27mA current of multiplexer ic.The multiplexer provides 6 inputs.The switches is packaged according to the way of RAIL.For the purpose of accepting voltage levels, the multiplexers have 2 input lines.It is necessary for the digitalswitch to operate normally that 3 circuits be formed.
MC100EL59DW Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
Power supplies of -4.5V
2 input lines
MC100EL59DW Applications
There are a lot of ON Semiconductor MC100EL59DW Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Logic circuits
- Speed control of medern motors
- Enabling different functions units in microprocessor instruction decoding
- Idle motor
- Steel plants
- Data communication
- To select different task for memory in microprocessor memory systems
- Audio transmission
- Make half adder
