MC100ELT21DTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100ELT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100ELT21 |
| Pin Count | 8 |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 1 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Output Polarity | TRUE |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | TTL |
| Translator Type | Mixed Signal |
| Input Signal | PECL |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100ELT21DTR2G Overview
In the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), it can be found.A Tape & Reel (TR) package is used to package it.Level translators is configured wlevel translatorsh an output of Non-Inverted.There is a translator type of Mixed Signal for this electrical device.The electronic part is mounted using the Surface Mount method.Unidirectional is the Channel type of this electrical device.There is -40°C~85°C TA operating temperature.There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.A base part number 100ELT21 indicates the related parts.The supply voltage of this device is 5V, and it is powered by it.With 8 pins, it is equipped with a minimal number of connections.There is one device in the 100ELT series, and it belongs to that series.The pin configuration of the device is 8.The design of this electronic part is based on 1 bits.The supply voltage is limited to 5.25V.A minimal voltage of 4.75V is needed to operate it.Mounting this electronic component is done using the Surface Mount method.1 channels are available.In order for Level translators to operate, level translators needs a power supply of 5V.For maximum efficiency, the supply voltage should be set to 5V.
MC100ELT21DTR2G Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
100ELT series
8 pins
5V power supplies
MC100ELT21DTR2G Applications
There are a lot of ON Semiconductor MC100ELT21DTR2G voltage translators & level shifters applications.
- Desktop PC
- Telecommunications
- Automotive
- Automotive infotainment
- Eliminate Slow or Noisy Input Signals
- Wearable Health and Fitness Devices
- Industrial equipment
- TVs
- Industrial Equipment
- Public Signage
