MC100ELT22DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 100ELT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100ELT22 |
| Pin Count | 8 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 1.56W |
| Output Current | 50mA |
| Number of Bits | 1 |
| Propagation Delay | 1.5 ns |
| Turn On Delay Time | 1.5 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Output Polarity | COMPLEMENTARY |
| Collector Emitter Breakdown Voltage | 400V |
| High Level Output Current | -50mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 50mA |
| Output Signal | PECL |
| Translator Type | Mixed Signal |
| Input Signal | TTL |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100ELT22DTG Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains it.A Tube package is used to package it.This output uses Differential.Level translators has the translator type Mixed Signal.Mounting this electronic component follows the Surface Mount method.This electrical device has a Channel type of Unidirectional.Operation is performed at -40°C~85°C TA.Due to its superior flexibility, it uses 1 circuits.Ending a transmission line involves 8 terminations.There is a base part number 100ELT22 that refers to the related parts.A supply voltage of 5V powers it.A total of 8 pins are included.Level translators belongs to the series 100ELT.The 8 pins are designed into it.There are 1 bits in this electronic part.There is a maximum voltage of 5.25V supported.A minimal voltage of 4.75V is needed to operate it.Mounting this electronic component is done using the Surface Mount method.2 channels are available.Level translators operates from a 5V power supplies.If the supply voltage is kept at 50mA, a high level of efficiency can be achieved.A high efficiency supply voltage should be maintained at 5V.
MC100ELT22DTG Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
100ELT series
8 pins
5V power supplies
MC100ELT22DTG Applications
There are a lot of ON Semiconductor MC100ELT22DTG voltage translators & level shifters applications.
- Telematics
- Extended Product-Change Notification
- Debouncing a Mechanical Switch
- Extended Product-Change Notification
- Telecom
- General purpose I/O level shifting
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- GPIO
- I2C / SMBus
- One Assembly and Test Site
