MC100ELT28DTG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 100ELT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100ELT28 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Single-Ended |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 1 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Logic Function | Translator |
| Halogen Free | Halogen Free |
| Output Polarity | COMPLEMENTARY |
| High Level Output Current | -3mA |
| Channel Type | Unidirectional |
| Low Level Output Current | 24mA |
| Output Signal | TTL, PECL |
| Translator Type | Mixed Signal |
| Input Signal | PECL, TTL |
| Output Latch or Register | NONE |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100ELT28DTG Overview
Embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is available for you to use.A Tube package is used to package it.This output uses Differential, Single-Ended.Translator type Mixed Signal is assigned to this electrical device.A Surface Mount mounting method has been used for this electronic part.The Channel type of this electrical device is Unidirectional.Level translators is -40°C~85°C TA at the operating temperature.To achieve its exceptional flexibility, it relies on 1 circuits.As part of the transmission line termination process, there are a total of 8 terminations.There is a base part number 100ELT28 that refers to the related parts.Level translators is powered by a 5V supply.A total of 8 pins are included.This is a device from the 100ELT series.With 8 pins, it is designed.Level translators is designed wLevel translatorsh 1 bLevel translatorss.There is a maximum voltage of 5.25V supported.This device requires a minimum voltage of 4.75V.Electronic parts are mounted using Surface Mount.There are 2 channels.A 5V power supply powers it.A high level of efficiency is achieved by maintaining the supply voltage at 5V.
MC100ELT28DTG Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
1 circuits
8 pin count
100ELT series
8 pins
5V power supplies
MC100ELT28DTG Applications
There are a lot of ON Semiconductor MC100ELT28DTG voltage translators & level shifters applications.
- Extended Product-Change Notification
- Signaling Level Conversion for Clock or Data
- SDIO
- Extended Product Life Cycle
- LCD Panels Using GIP / GOA / ASG Technology
- I2C
- Advanced Driver Assistance System (ADAS)
- Automotive infotainment
- Extended Product-Change Notification
- Data and Clock Transmission Over Backplane
