MC100EP016AFAR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP016 |
| Pin Count | 32 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 1 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive, Negative |
| Count Rate | 1.4GHz |
| Timing | Synchronous |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP016AFAR2G Overview
A device of this type is supplied in a package of type [0]. This configuration uses 32terminations. With a supply voltage of 3.3V volts, it is possible to run it in a fully flexible manner. There are wires connecting 1elements. There are 32pins on all components. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 32pins used to connect other components. Using [0], it can be mounted. With its 100EPseries designation, it can be used for a range of applications. The logic type of Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~70°C. This device is mounted in a Surface Mountmanner. By providing the supply voltage of [0], it is capable of operating more reliably. The array contains elements that store 8bits each. Pbfree code may result in yes. These electronic devices have many important features, and NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6Vis one of them. Further related parts can be found under its base part number 100EP016. The packing of this product is performed by [0]. From the voltage source, there is a voltage of -4.5V volts. It is possible to supply the device with the minimum supply voltage (Vsup) of 3V. It is possible to reach a maximum supply voltage of 3.6VV (Vsup).
MC100EP016AFAR2G Features
Embedded in the 32-LQFP package
8 bits per element
NECL MODE: VCC = 0V WITH VEE = -3.0V TO -3.6V
MC100EP016AFAR2G Applications
There are a lot of ON Semiconductor MC100EP016AFAR2G Counters & Dividers applications.
- Dual Up Counters
- POWER COMPUTATION
- Frequency dividers
- Divide-by"N" counters/frequency synthesizers
- TRUE RMS-TO-DC CONVERSION
- DIVISION
- Divide-by-N counting
- Fixed or Programmable Frequency Division
- Clocks
- Timing applications
