MC100EP08DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V |
| Subcategory | Gates |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 3GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP08 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Nominal Supply Current | 38mA |
| Propagation Delay | 300 ps |
| Quiescent Current | 30mA |
| Logic Function | XNOR, XOR |
| Number of Inputs | 2 Input (1, 1) |
| Halogen Free | Halogen Free |
| Logic Type | XOR/XNOR Gate |
| High Level Output Current | -50mA |
| Low Level Output Current | 50mA |
| Power Supply Current-Max (ICC) | 40mA |
| Schmitt Trigger Input | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP08DTR2G Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There is a Tape & Reel (TR) package included in this package as well. The Surface Mount version is also available. The Differential output function of this machine is fully functional. The communication type is XOR/XNOR Gate logic. There has been an increase in operating temperature at -40°C~85°C. It has inputs for 2 Input (1, 1) axis. The 100EP series includes this, so it belongs there. It operates using 3V~5.5V power supply. The part has 8 terminations as part of its design. Find more similar parts by searching 100EP08. An assembly of 8 pins is present. Installation and disassembly of the device are made easy by its Surface Mount design. In this case, we have a 8 solution for logic gates. It is normal to need 3.3V volts for this part. As a matter of fact, this is a Gates for specialiGatesed needs, if you will. In the quiescent state, the device is carrying a current of 30mA across its surface. Packaged in a TAPE AND REEL package that meets all the necessary specifications. A maximum voltage of 5.5V should be kept as low as possible in order to protect the device. This device is dependent on 3V voltage or higher to operate. The device uses 2 outputs. The logic is improved through the use of 1 elements. This part features NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V, too, to enhance performance. A -4.5V power supply is usually required to power the device.
MC100EP08DTR2G Features
XOR/XNOR Gate logic device.
2 Input (1, 1) inputs.
2 outputs.
1 elements.
NECL MODE: 0V VCC WITH VEE = -3.0V TO -5.5V.
Uses -4.5V.
MC100EP08DTR2G Applications
There are a lot of ON Semiconductor MC100EP08DTR2G Multi-Functional Gates & Inverters applications.
- Digital radio or internet radio players
- Solid dtate drive (SSD): enterprise
- Consumer
- General-purpose gating logic
- Portable media players
- Selection of up to 8 logic functions
- Computer
- Cameras
- Digital video cameras (DVC)
- AV receivers
