MC100EP131FAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Weight | 773.99868mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | 100EP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V |
| Subcategory | FF/Latches |
| Technology | ECL |
| Voltage - Supply | -3V~-5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100EP131 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Nominal Supply Current | 120mA |
| Output Current | 50mA |
| Number of Bits | 4 |
| Clock Frequency | 3GHz |
| Propagation Delay | 700 ps |
| Turn On Delay Time | 460 ps |
| Logic Function | AND, D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3000000000Hz |
| Height | 1.45mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP131FAG Overview
The flip flop is packaged in a case of 32-LQFP. It is included in the package Tray. The output it is configured with uses Differential. In the configuration of the trigger, Positive, Negativeis used. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a -3V~-5.5Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. The 100EPseries comprises this type of FPGA. A frequency of 3GHzshould be the maximum output frequency. There are 1 elements in it. 32terminations have occurred. The object belongs to the 100EP131 family. The D flip flop is powered by a voltage of 3.3V . It is mounted by the way of Surface Mount. Basically, it is designed with a set of 32 pins. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 4bits. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. The output current of 50mA makes it feature maximum design flexibility. 4input lines are available for you to choose from. In addition, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vis a characteristic of it.
MC100EP131FAG Features
Tray package
100EP series
32 pins
4 Bits
MC100EP131FAG Applications
There are a lot of ON Semiconductor MC100EP131FAG Flip Flops applications.
- Modulo – n – counter
- Safety Clamp
- Instrumentation
- Storage registers
- Cold spare funcion
- Registers
- Frequency Divider circuits
- Guaranteed simultaneous switching noise level
- Computers
- Reduced system switching noise
