MC100EP139DTG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 100EP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 16.3A |
| Frequency | 1GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC100EP139 |
| Output | ECL |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Power Supplies | -3.0/-5.5/3.3/5.0V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Operating Supply Current | 84mA |
| Propagation Delay | 1.1 ns |
| Turn On Delay Time | 1.1 ns |
| Logic Function | Clock |
| Max Input Voltage | 2.42V |
| Halogen Free | Halogen Free |
| Breakdown Voltage | 68V |
| Input | NECL, PECL |
| Ratio - Input:Output | 1:4 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Max Duty Cycle | 50 % |
| Divider/Multiplier | Yes/No |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC100EP139DTG Overview
Clock generator is packaged in the way of Tube. The 20-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 20 terminations in this file. This clock generator ic should receive a voltage of 3.3V. In this clock generator, NECL, PECL is used as the input to the clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. There are 3V~5.5V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in ECL logic that can be used with this clock generator. This electronic component can be classified as a Clock Generator. It is a 20-bit IC that is designed for microprocessors specifically. According to the base part number MC100EP139, its related parts can be found. There is a 20 pin that is available on the frequency synthesizers. Time clock generator is capable of handling a voltage of 5V. There are a number of electronic parts in the 100EP series, including this one. The output frequency can be magnified as high as possible with the assistance of 4 signal outputs. It is able to realize high efficiency when operating at a frequency of 1GHz. A supply current of 84mA is required to fully operate clock PLL. A RF synthesizer that combines logic function Clock for clocks with input data.
MC100EP139DTG Features
Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 5V
MC100EP139DTG Applications
There are a lot of ON Semiconductor MC100EP139DTG Clock Generators applications.
- Jitter reduction
- Wireless infrastructure
- Skew suppression
- Tracking filters
- Digital circuits
- Closed circuit systems
- Wireless base station for LTE, LTE-advanced
- Time to digital converters
- Satellite receivers
- Frequency synthesis
